Improved Control for Better Results in Metal and Coil Coating

In your coil coating process, fluctuations in fluid viscosity can cause variations in film build from edge to edge, resulting in different cure rates across the face of the strip. This increases the likelihood of curing-related defects.

In coil and metal coating, the performance of the final product is dependent on the coating being of a consistent thickness along both the length and width of the coated area. Variations in coating thickness can result in color, gloss and surface finish inconsistencies, reduced corrosion protection, and shortcomings in adhesion and durability.

Issues We Solve

Relying on cup viscosity measurement can result in measurement variations within a single coil coating run.

By employing effective temperature and viscosity control solutions, you can ensure your process avoids some of the problems that commonly affect coil coating operations:

  • Inaccurate solvent additions
  • Improper coater set up
  • Out-of-specification coating runs
  • Wet film-build discrepancies
  • Increased operating costs
  • Decreased quality and throughput

How We Help

By controlling temperature, you are able to stabilize the viscosity of the coating material at the point of use. Achieving stable viscosity requires both heating and cooling capability.

Saint Clair Systems’ proprietary temperature control solutions use mathematical models and a mastery of flow dynamics to maximize your process control, leading to:

  • Repeatable line setup parameters
  • Consistent film build across web/strip
  • Reduced coating material usage
  • Reduced emissions
  • Reduced scrap
  • Increased throughput

Proven Solutions - Proven Results

With over 3600 applications under our belt, we have the experience and expertise to streamline your processes and cut costs.

SCS_casestudy_coil_coating indd

Case Study: Process Temperature Control

A potential customer was confident their processes were running fine and temperature control would offer minimal benefit.

So, we provided a free analysis of their systems using our proprietary software. We were able to show how differences in paint temperature were leading to excess coating. Our proposed solution saved over $500,000 in coating and solvent usage.

Curious how we can help you reduce your materials cost? Contact us today for a free assessment of your processes.

Our Products

Interested in improving your finishing process? We’ll evaluate your process for improvements. If needed, we’ll even provide a demo product to show you the improvements first-hand.

Reqeust a Demo Unit
image (8)

Air-Cooled Chillers

Learn More
image-(8)

Water-Based Temperature Control Units

Learn More
image-(8)-1

Thermo-Electric Temperature Control System

Learn More
We reported increased stability in striation patterns when applying PVC to aluminum to create a woodgrain finish. We reported significant reductions in color match issues as a result of consistent film build

- Alsco

Steelscape reported reduced “ropiness” when applying Polyester to steel resulting in a finish that “looks sprayed rather than rolled, Steelscape reported 75% reduction in solvent pop due to reduced solvent addition. Steelscape reported 100% reduction in solvents added to primers and backers and 60% reduction in solvents added to finish coats. This was the easiest capital project implementations that we’ve ever done!

- Ron Hurst

- Steelscape

Our system provided the biggest bang for the buck of any capital project so far!

- Jay Michae

- Ternium

Reported solvent reductions between 80% - 100%

- Ternium Shreveport

As part of our ongoing continuous improvement plan at Roush, we decided to take a more aggressive approach to our temperature control in the paint shop. The resulting quality improvement was immediately noted and helped drive our FTC (First Time Capability) up and sustain it where we needed it to be.

- Patrick Henterly

Roush Manufacturing

At Valspar, we formulate our paints to run under a variety of different conditions and process variables. One of the primary variables is the paint temperature, which can vary from 40°F to 100°F based on the conditions at the coil coating facility. This wide swing in temperature can play havoc with both paint viscosity and application setup. Having consistent and targeted paint temperature removes this process variable and its effects from the equation. Additionally, having consistent paint temperature ensures optimal (minimal) usage of expensive reducing solvents to attain the desired viscosity and applied paint film thickness.

- Kent Hatch

Valspar Corporation

“Being able to control the temperature within a narrow range as paint is being used can be very beneficial. The most obvious benefit is a reduced amount of solvent usage. This is not only more economical for the coater but also reduces the environmental impact and health risks to their employees. Reducing the amount of solvent added [provides] additional benefit to the performance of the paint being used. The two major benefits are: Reduced possibility of having solvent popping or blistering problems. The addition of too much solvent to certain paints or certain colors of paints may cause color shifts or gloss changes and by reducing the amount that needs to be added this can be avoided.”

- Herald Cales

Akzo-Nobel

Request A Process Evaluation Today

You show us your process. We show you viscosity and temperature control solutions that can improve product quality and efficiency, while reducing waste.

If your process requires it, we can even provide a demo unit to show you the power of these solutions first-hand.